WELDING EQUIPMENT::
PLASMA CUTTER

Where to find PLASMA CUTTER in Boise

Image for reference only
Actual item may look different
Click on image for larger view

2 Hour: $34.00
4 Hour: $57.00
Daily: $66.00
Comments:
  • The Powermax30 XP is a highly portable, 30 A, handheld plasma cutting system appropriate for a wide range of applications. It uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum. Can be operated with either 120v or 240v.
  • *****Requires the use of an Air Compressor with a min of 4cfm @ 80 psi*****
  • Recommended Cutting thicknesses:
  • 240V - 3/8" with a max of 1/2"
  • 120V - 18 gauge with max of 1/4"
  • Specs:
  • Input voltages
  • 120-240 V, 1-PH, 50/60 Hz
  • Input current @ 3.8 kW
  • 120-240 V, 1-PH, 25-18.8 A
  • Output current
  • 15-30 A
  • Rated output voltage
  • 125 VDC
  • Duty cycle @ 40°C (104°F)
  • 35%, 240 V
  • 20%, 120 V
  • Open circuit voltage (OCV)
  • 256 VDC
  • Dimensions with handles
  • 356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H
  • Weight w/ 4,5 m (15') torch
  • CSA: 9.7 kg (21.4 lbs)
  • CE, CCC: 9.5 kg (21 lbs)
  • Gas Supply
  • Clean, dry, oil-free air or nitrogen
  • Recommended gas inlet
  • flow rate / pressure
  • 113.3 l/min (4 scfm) at 5.5 bar (80 psi)
  • Input power cable length
  • 3 m (10')
  • Power supply type
  • Inverter - IGBT
  • Engine drive requirement
  • 5.5 kW for full 30 A output
* Prices are subject to change.  Please call us for special weekly or monthly rental rates.